Sears KENMORE 93331 - Manual (Page 12)

ANTI-TIP DEVICE
ADJACENT CABINET
A
If your range is removed for cleaning,
servicing or any reason, be sure anti*
tip device is re-engaged properly
when the range is replaced. Failure
to take this precaution could result in
tipping of the range and cause injury.
When replacing the range:
1. Slide the range Into place.
2. Be sure the rear leg leveler fully engages the slot in
the bracket. To Insure the device Is properly In­
stalled and engaged, remove the drawer panel and
Inspect the rear leveling leg. Make sure It fits
securely into the slot.
REMOVABLE STORAGE DRAWER
This drawer gives you space for keeping cook­
ware and bakeware. Plastics and flammable
material should not be kept in this drawer.
Do not overload the storage drawer. If the drawer Is too
heavy, it may slip off the track when opened. To open the
drawer, grasp the center of the handle and puli straight
out.
To remove:
Pull drawer straight out and lift over the guide stops.
To replace:
Lift over the guide stops and slide drawer Into place.
REPLACING THE OVEN LIGHT
Be sure that the light switch is in the off position.
Do not touch hot oven bulb. Do not touch oven
bulb with wet hands. Do not wipe oven light area
with wet cloth.
Never touch the electrically live collar on the
bulb when replacing it.
Electrical power must be shut off if you have to
replace a broken bulb.
1. Unscrew glass cover and remove.
2. Replace the bulb with a 40 watt appliance bulb.
3. Replace the cover.
Note: We recommend you use a 40 watt appliance bulb
that Is no longer than 3 1/2".
11 NEMNT39