Sears 934.4482639 - Manual (Page 26)

Press SET "+" or button until AM or PM is
displayed. (Example; PM)
▼CHANNEL
(------- 1 (------
SET +
OUICK SET PROORAM-
OATE 03/25 THU
STARTTIME tOOO PM
•*END TIME 11AS^PMCN
CHANNEL 06 *
TAPE SPEED SLP
Press SET "+" or "-"button until your desired channel
number is displayed. (Example: 10)
•QUICK SET PROGRAM­
DATE 03/25 THU
START TIME 1000 PM
END TIME 1100 PM
-►CHANNeL.«MT0C«
t /№ espee 6
Press SET"+" o r b u t t o n until your desired tape
speed is displayed. (Example: SP)
-QUICK SET PROGRAM­
DATE 03/25 THU
START TIME 10:00 PM
END TIME 11:00 PM
CHANNEL 10
-TAPE SPEEOl'^
Press QUICK SET PROGRAM button or MENU
button on the remote control.
MONITOR
CZD
QUICKSET
PROGRAM
Press POWER button to set Quick Set Program.
The TIMER REC indicator lights up.
POWER
While watching TV, "TIMER REC STANDBY"
starts flashing on the TV/VCR screen 2 minutes
before the programmed start time.
You must turn off the TV/VCR to actiyate auto­
matic timer recording.
When the programs overlap. Quick Set Program
has priority.
If you program as per the illustration the timer
recording would be carried out as follows.
11:00-0:00 for QUICK SET PROGRAM
(PROGRAM 8)
0:00-for PROGRAM 2
TO CANCEL A QUICK SET PRO­
GRAM WHILE IN PROGRESS
Press STOP/EJECT button on the TV/VCR. The
program will be canceled and the display returns
to original mode.
CHECKING THE START/END TIME
To check the start/end time and channel nufnber,
follow steps 1) ~ 5) below.
1) Press MENU button on the remote control.
2) Select item 1 (TIMER PROGRAMMING) with
number button or CH./SET ("-t" or"-") button.
3) Press SELECT button.
4) Select program number 8 with number button
or CH./SET ("-t" or "-") button. "QUICK SET
PROGRAM" appears on the TV screen
5) Press MENU button. The display returns to
original mode.
-26