Sears 934.4482639 - Manual (Page 8)

REMOTE CONTROL OPERATION
You can operate most of functions from the Re­
mote Control (included). The buttons on the Re­
mote Control have the same functions as the
corresponding buttons on the unit.
HOW TO USE REMOTE CONTROL
1 POWER button— To activate the automatic
timer recording and turn TV/VCR on and off.
2 NUMBER buttons- To select desired channels.
To select channels 1 to 9, first press the 0 button
and then press desired channel button 1 to 9.
+100 button- To select channels which are
equal or greater than number 100.
3 STOP button- To stop tape motion.
4 PLAY button- To playback the tape.
5 REW button- To rewind the tape. To view the
picture rapidly in reverse, in the play mode.
(Rewind Search)
6 F.FWD button- To move the tape forward rap­
idly. To view the picture rapidly in forward in
the play mode. (Forward Search)
7 REC button- Press to begin manual recording.
8 PAUSE/STILL button— To stop the tape tem­
porarily during playback or recording.
9 MENU button- Press to display main menu on
the TV screen. (This function is operative only
when the main menu is displayed on TV screen
in the Stop mode.)
10 SELECT button- Press to select setting modes
(clock, counter, tape speed, program, CH pre­
set) in the main menu. (This function is opera­
tive only when the main menu is displayed on
TV screen in the Stop mode.)
Status function- Press to display the counter or
the current channel number and current time
on the TV screen.
-^DD/DELETE button- Press to cancel memo­
rized channel or Timer Program, and to add
desired channel. (This function is operative
only when the main menu is displayed on TV
screen in the Stop mode.) (See page 18,24)
COUNTER RESET button—To reset counter to
0000
.
12 COUNTER MEMORY button- To set counter
memory on and off. (See page 21)
13 SPEED button- To set desired recording
speed. (SP/LP/SLP)
14 MONITOR button- Press to turn the TV screen
on and off when in the Recording mode.
15 MUTE button- To mute sound. Press again to
resume sound.
16 VOLUME buttons— To adjust desired volume
level by pressing either " a " or "T" button.
17 CH. buttons- To select desired channel by
pressing either " a " or "T" button. They cannot
be used during Timer Recording.
They may also be used to adjust the picture
control. (See page 19)
SET button- Adjust time with
" a " or "T" but­
ton in the Menu mode.
(This function is operative only when the main
menu is displayed on TV screen in the Stop
mode.)
1'^^ACKING buttons— Adjust to minimize
video 'noise' (lines or dots on screen) during
playback. (See page 32)
18 EJECT button- Press to remove tape from
TV/VCR.
19 SLEEP button- To activate the sleep function.
(See page 29)
8-