Sears KENMORE 385. 12708 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTION 2. PREPARE THE MACHINE FOR SEWING
Pick Up the Bobbin Thread
A
thread loosely in left hand and rotate
handwheel toward you one complete
turn.
2. Bring bobbin thread up by pulling
top thread.
back of the presser foot, leaving 4
to 6 inches of thread clear.
If you cannot pick up bobbin thread by following steps given above, then check:
1.
Is needle threaded from front to back?
2.
Is thread tangled around needle?
3.
Are 3 to 4 inches of thread coming from the shuttle?
4.
Is thread from shuttle tangled?
5.
Is bobbin property installed in the bobbin case?
6.
Is the machine threaded according to the instructions?
12
Advertising
This manual is related to the following products: