Repeat this step with the rear shroud (not shown) – Sears 831.15403 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
65. Attach the Lock Plate (80) to the Right Seat
Frame (9) with an M8 x 69mm Shoulder Bolt (87),
an M8 Washer (117), and an M8 Nylon Locknut
(115). Do not overtighten the Locknut; the
Lock Plate must be able to pivot easily.
Attach the Leg Pin (83) to the Right Seat Frame
(9) with an M4 x 16mm Self-tapping Screw (113).
Insert the Leg Pin through the Lock Plate (80)
and the Leg Lever (11).
66. Press the two Shroud Covers (26) onto the Front
Shroud (15), which has a taller opening than the
Rear Shroud (not shown). Attach the Shroud to
the Right Top Frame (7) and the Right Base (1)
with four M6 X 22mm Bolts (109), four M6
Washers (132), and four M6 Nylon Locknuts
(135).
Be careful not to scratch yourself when
reaching through the hole in the Shroud.
Repeat this step with the Rear Shroud (not
shown).
22