Canon 210 - Manual (Page 154)

154
Using an Eye-Fi Card
Checking Connection Information
You can check the Eye-Fi card's access point SSID, or connection status.
Choose [Connection info].
● Touch ø, then n to choose the
3 tab, and touch [Eye-Fi Settings].
● Touch [Connection info], then touch
[Connection info] again.
X The Connection info screen will appear.
Disabling Eye-Fi Transfer
You can set the card to disable Eye-Fi transfer.
Choose [Eye-Fi trans.], then
[Disable].
● Touch ø, then n to choose the
3 tab, and touch [Eye-Fi Settings].
● Choose [Eye-Fi trans.], then touch qr to
choose [Disable].
What if [Eye-Fi Settings] does not appear?
[Eye-Fi Settings] will only appear when the Eye-Fi card is inserted in the camera.
If the Eye-Fi card has a write-protect tab, you will not be
able to check the card's connection status, or disable Eye-Fi
card transmission when the tab is in the locked position.