Canon 210 - Manual (Page 29)

29
Viewing Images
Active Display
When an image is displayed, lightly tapping the camera as shown below will
switch to the next image.
Switching to Shooting mode
Pressing the shutter button halfway while in Playback mode switches the
camera to Shooting mode.
• Be sure to put the strap around your wrist, and hold the camera firmly to
avoid dropping it.
• Depending on the way you tap the camera, images may not switch.
Switch to next image Switch to previous image
Tilt the camera to switch images
If you touch and hold q at the left of the screen
and tilt the camera as shown while switching
through images, the images advance quickly.
Tilt the camera in the opposite direction while
holding
r.
While dragging an image, if you touch and hold q or r the image will
appear coarse.