Sears 385 - Manual (Page 8)

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Set Up the Machine
Plug in the Machine and Switch on the Power Foot Control Use
machine, be sure the power switch is
OFF,
1. Check your outlet to be sure it is a 110 to 120
Volt AC outlet,
2. Insert the machine plug into the three-prong
outlet, as shown. It will only fit one way.
3. Insert the power supply plug into the outlet.
SAFETY FEATURE:
Your machine will not operate unless the
NOTE:
light/power switch is turned on. If you are
interrupted or stop sewing, turn off the
light/power switch to prevent injury to
children.
OPERATING INSTRUCTIONS
”For appliances with a polarized plug (one blade wider than the other).
To reduce the risk of electric shock, this plug is intended to fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If It still does not fit, contact a qualified electrician to install
the proper outlet. Do not modify the plug in any way."
which you sew.
To increase speed, gently press down with
the ball of your foot.
To decrease speed, release your foot pres­
sure slightly.
The foot control is sensitive and
will increase or decrease your
sewing speed immediately.
Practice on a scrap of fabric to
regulate your sewing speed to
your taste and needs.
"Foot Controller Model YC-482P or YC-530 for use with Sewing Machine Models
385.1778XXX, 385.1684xxx, 385.1584xxx, 385,1664xxx, 385.1754xxx, 385.17526xxx.
385.1764XXX, 385.1884XXX, 385,17928xxx, 385.17924xxx. 385.18836xxx,
385.17922XXX, 385,16816xxx, 385,17822xxx, 385.17828xxx, 385.18830xxx and
385.17026XXX.
XXX - represents numbers 000 through 999."
(For U.S.A. market only)