Sbcriq-'j 3. i earn th= f.t'tnnr – Sears OVERLOCK 3/4D 385.16631 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SbCriQ-'J 3. I EARN TH= F.T'Tnnr?.
Rolled Hemming, Pieot Edging and Narrow Hemming (continued)
Adjusting Thread Tension
1. Set the tension dials as shown on
page 33.
2.
Sew and check the tensions.
— For better result —
how to Adjust the Thread Tension
• For Rolled Hemming and Pi cot Edging
Wrong Tension
Wrong Tension
Wrong Tension
Rolled Hemming
Pull the end of thread chain to the
back lightly in the beginning and end
of sewing.
Pull the fabric lightly to the back
while sewing.
® For Narrow Hemming
Refer to page 25 for the adjustment.
34
Advertising