Wiring with wall switches – Hunter 25271 Globe Fitter User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WIRING WITH WALL SWITCHES
FAN AND LIGHT KIT CAN BE CONNECTED THROUGH WALL SWITCHES. THIS CAN BE DONE IN TWO WAYS;
1. USING ONE WALL SWITCH TO CONTROL BOTH FAN AND LIGHT, INDIVIDUAL CONTROL OF EITHER FAN
OR LIGHT IS DONE WITH THE PULL CHAIN SWITCHES.
2, USING TWO WALL SWITCHES TO INDIVIDUALLY CONTROL BOTH FAN AND LIGHT - ONE FOR THE FAN
AND THE SECOND FOR THE LIGHT. PULL CHAIN SWITCHES ON THE FAN DO NOT HAVE TO BE USED.
SELECT THE TYPE OF CONTROL DESIRED AND WIRE THE UNIT PER ONE OF THE DIAGRAMS SHOWN BELOW.
FAN AND LIGHT ON A SINGLE WALL SWITCH
TAN AND LIGHT ON SEPARATE WALL SWITCHES
WHITE WIRE
115 V SUPPLY
BLACK WIRE
WALL SWITCH WALL SWITCH
FOR LIGHTS
FOR FAN
USE GENERAL PURPOSE.
UL LISTED SWITCHES
SINCE
LIGHT KIT
vr
WHITE WIRE
BLACK WIRE WITH
WHITE TRACER
CEILING FAN
MOTOR CONNECTIONS
(NON-ACCESSIBLE)
BLACK WIRE
WITH WHITE TRACER
WHITE WIRES
BLACK WIRE
teas
HUNTER FAN CO. MEMPHIS. TN, 3S114
©199i HUNTER FAU COMPANY
FORM 41371-01 REV 2/98