Audio delay, Audio clarity – Nortel Networks NN42340-100 User Manual
Page 78
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mobile Voice Client 2050 for expert users
Audio delay
If you experience audio delay, you can decrease the number of buffers,
and reduce the delay, by adjusting the slider on the Audio screen.
Audio clarity
If you experience breakups in the receive audio stream, adjust the setting
towards Higher Quality. This increases the number of audio buffers used
to process incoming audio. If the delay is too large, you can decrease this
setting.
If you experience broken or choppy speech at either end of the call, or if
the dial tone sounds choppy, avoid using your PDA volume control.
Instead, use the volume controls on the MVC 2050 toolbar to adjust the
volume of your call.
Note: QoS 802.11 p/q is not supported due to device constraints.