Nortel Networks NN42340-100 - Manual (Page 82)

Mobile Voice Client 2050 for expert users
Items on the Listener IP screen
Table 8 describes selections available on the Listener IP screen.
Table 8: Listener IP screen
Selection Description
Use a specific
address
The MVC 2050 normally listens to all IP
addresses on the device for communication
server-to-terminal (UNIStim) messaging on all the
Network Interface Cards (NIC) on the device. This
is the default mode of operation. To override this
behavior, select the check box, and enter a
specific IP address.
Use a specific
port The MVC 2050 listens to IP port 5000 on the
device for communication server-to-terminal
(UNIStim) messaging.
Hardware ID
The Hardware ID screen is for expert users and system administrators. It
can be used to select the Media Access Control (MAC) address that the
MVC 2050 reports to the communication server.
The Hardware ID being used by MVC 2050 can be viewed on the
MVC 2050 Settings > Hardware ID tab. See Figure 35 on page 83.