SoundMax SM-CDM1032 - Manual (Page 13)

13
Mute function
Press the MUTE button to cancel the sound. Press it again or VOL +/ - to resume.
Subwoofer control
Press and hold the BAND/ SUB button to turn the Subwoofer output ON. An external
amplifier is required to operate a subwoofer.
Beep Sound Off function
Press the VOLUME knob / SEL until “Beep On” is displayed. Turn the Volume knob to switch
between Beep ON and OFF.
Equalizer setting
Press the Volume button, until “EQ” indication is displayed then rotate the Volume knob to
choose between the EQ sound effects: CLASS => POP => ROCK => FLAT.
Clock display
Press and hold the PTY/CLK button to display the clock, then press and hold the button until
the hour blinks on the display.
Rotate the VOL knob to set hours, then press the VOL knob for the minutes to blink and
rotate the VOL knob to set.
Press the PTY/CLK button again or leave the unit idle for new setting to effect. Press the
PTY/CLK button anytime to view the time clock display.
Radio operations
BAND selection
Press the BAND / SUB button repeatedly to select your desired radio band during RADIO
mode: FM1, FM2, FM3, AM1, AM2. Each band can store 6 preset stations, for a total of 30
preset memory stations.
Tuning
In Radio mode press briefly / buttons on the panel to manually adjust the radio
frequency. Press and hold for 2 seconds / buttons and radio will seek the next strong