SoundMax SM-CDM1032 - Manual (Page 18)

18
Inserting the USB/ SD device
Remove the cover from the USB port, then insert the USB device into the USB slot on the
front panel. Then the playing mode will be changed into USB mode automatically. Or press
the MODE button to select USB. The first USB device track playback will start.
Pausing playback
To ensure good system performance, wait until the unit finishes reading the disc information
before proceeding.
Press the No 1 / PLAY / PAUSE button to pause the playback. Press again to resume the
playback.
Playing the previous/ next track
During playback press the button to go to the beginning of the current track. Press again
to go to previous track.
During playback press the button to go to the next track.
Fast forward and backward playback
Press and hold the / buttons to fast the playing in backward or forward direction.
Release the button when the desired location is found.
UP 10/ DN 10 function (for MP3, WMA modes)
Press the No 6/ UP 10 button to advance 10 track at a time.
Press the No 5/ DN 10 button to go back 10 track at a time.
Repeat playback
During disc playback, press the No 3 / RPT button to repeat the current track playback. The
display will show “RPT”. Press again to cancel.
During playback the MP3/ WMA/ USB/ SD format press the No 3/ RPT button to choose RPT-
1, RPT-DIR (folder repeat) or RPT-OFF.
Random playback
During disc playback, press the No 4 / RDM button to start random playback of the tracks.
The display will show “RDM”/ “RDM ON” (in USB/ SD mode). Press again to cancel.