Cingular TR-1 - Manual (Page 14)

14
Appendix 3: Pairing Bluetooth Decoder to a Computer
The instruction is provided as a general guideline. The steps may be different on your
particular device. Please refer to user manual of each device for more detailed information.
Windows with XP Bluetooth Manager
1. Open Control Panel .
2. Double click on Bluetooth Devices .
3. On the Devices tab, click on Add… button.
4. The Welcome to the Add Bluetooth Devise Wizard will show on screen.
5. Put a check on My device is setup and ready to be found , and go Next .
6. From the list of Bluetooth devices found, select GPS and go Next .
7. Select Use the passkey found in the documentation
8. Enter 0000 , then go Next .
9. Click Finish to complete the setup and take a note of the Outgoing Com port.
Windows with Widcomm/Broadcom Bluetooth Manager
1. From Desktop, click on My Bluetooth Places icon to open Bluetooth Manager.
2. Click on Search for devices in range to search all available Bluetooth devices.
3. Enter 0000 as passkey and BT GPS icon should be displayed.
4. Right click and select Connect SPP Slave .
5. The Bluetooth connection will be established and BT GPS icon will become green.
MAC OS X 10.3 or older
1. Go to System Preferences and click on the Bluetooth icon.
2. Click on settings to ensure BT is turned on and discoverable .
3. Select the Devices tab.
4. Click on set up new device and this brings up the Bluetooth Set Up Assistant.
5. Follow the instructions on the set up assistant and enter 0000 as passkey.
6. The device should be listed in the devices window.
7. Locate the BT serial utility application in the utilities folder, double click to open.
8. Click on new .
9. Assign the port a name, select outgoing , click on select device .
10. Select the Bluetooth GPS and highlight SPP slave in the right hand window.
11. Click select button and select the port type RS-232 .
12. Click OK to finish setup.
MAC OS X 10.4
1. Go to System Preferences and click on the Bluetooth icon.
2. Click on settings to ensure BT is turned on and discoverable .
3. Select the Devices tab.
4. Click on set up new device .
5. The Introduction page is displayed and click Continue .
6. Select Any Device and click Continue .
7. Select BT GPS and click Passkey Options .
8. Bluetooth Device Setup is displayed and click Continue .
9. Enter 0000 as passkey and click Continue .
10. To finalize setup, click Quit .