Cingular TR-1 - Manual (Page 15)

15
Appendix 4: Pairing Bluetooth Decoder to a PDA
The instruction is provided as a general guideline. The steps may be different on your
particular device. Please refer to user manual of each device for more detailed information.
Pocket PC WM2003/WM2003SE
* Make sure Bluetooth is enabled on the Pocket PC.
1. Open Bluetooth Manager by clicking on Bluetooth Manager icon.
2. Select New -> Connect! to start Connection Wizard.
3. Highlight Explore a Bluetooth device and click Next .
4. Select Tap here to choose a device and click Next .
5. Bluetooth wizard will search and display available Bluetooth devices on screen.
6. Click on BT GPS icon and available service will display.
7. Enter 0000 as passkey.
8. Select SPP Slave and click Next .
9. Select Finish and BT GPS is now available as short cut.
Pocket PC WM5/WM6
1. Open Bluetooth Manager by clicking on Bluetooth Manager icon.
2. In Mode tab, Please check Turn On Bluetooth .
3. In Devices tab, click on New Partnership to begin pairing of devices.
4. Click on the device found (BT GPS) and click Next .
5. Enter 0000 as passkey and click Next .
6. Check the Serial Port box and click Finish .
7. In COM Ports tab, click on New Outgoing Port .
8. Do not check Secure connection.
9. Tap Next when the new found device appeared and highlighted.
10. Select com port that is allowed by your PDA (ie COM7) and Click Finish .
Palm OS
1. Click on Bluetooth icon to start Bluetooth Manager.
2. Make sure Bluetooth is selected to On .
3. Click on Setup Devices and then click on Trusted Devices .
4. Click on Add Devices to search for available devices.
5. Click on Bluetooth GPS and enter 0000 as passkey.