Cingular TR-1 - Manual (Page 7)

7
Setting up GPS / GSM Tracker (Cont.)
3. Switch On
Press the power button to switch on TR-1 tracker. Please make sure the GPS LED is
flashing indicating it is getting a fix from the satellites. This may take 1 –2 minutes when
you use the tracker for the first time. Also, the GSM LED also needs to be flashing
indicating SIM card is inserted and GSM network is stand by.
4. Installation
The high sensitivity of TR-1 tracker enables it to operate in challenging environments. TR-
1 tracker will work inside a vehicle, in glove box, under seats, or even inside the trunk.
However, it is always recommended to install TR-1 in places with best view of the sky
whenever possible.
Green – Recommended
Red – Not recommended
? – Experimentation required