Signal flow, Connecting a dvd player (dvd), Note – Onkyo TX-SR601 User Manual
Page 18: Connections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
Connecting a DVD Player with 2-Channel (L/R) Audio Output
: Signal flow
4. Connecting a DVD player (DVD)
Using an RCA video cable, connect the video output jack
(composite) of the DVD player to Che DVD V IN jack of the TX-
SR701/701E/601/601E. Or if the DVD player has an S video output
Jack, connect it to the DVD S IN jack with an S video cable. Or if
the device has component video outputs, connect them to Che
COMPONENT VIDEO INPUT 1 or 2 ¡ack.s on the TX-SR701/
701E/601/601E.
'
With the initial settings of the TX-SR701/701E/601/601E, the
DVD input source is set for the COMPONENT VIDEO INPUT
I jacks.
If you connect the DVD player to the COMPONENT VIDEO
INPUT 2 jacks, this must be changed at “Input Setup” —>
“Component Video” (see page 33).
Using an RCA audio connection cable, connect the audio output
jacks of the DVD player to the DVD FRONT L/R jacks of the TX-
SR701/701E/601/601E. Make sure that you properly connect Che
left channel to the L jack and the right channel to the R jack.
If the device has a 5.1-channel output, connect the DVD FRONT L/
R, SURR L/R, CENTER, and SUBWOOFER (5.1-channel input)
jacks of the TX-SR701/701E/601/601E to the 5.1-channel output
jacks of the DVD player. Make sure that you properly connect Che
left channels to the L jacks and the right channels to the R jacks.
If the device has a digital output, connect it to either the DIGIIAL
IN COAXIAL jack or the DIGITAL IN OPTICAL jack of the TX-
SR701/701E/601/60JE depending on the type of connector on Che
DVD player.
With the initial settings of the TX-SR701/701E/601/601E, the
DVD input source is set for digital input at the OPTICAL 1 jack
(OPT 1).
If the digital connection is made at a different jack, this must be
changed at “Input Setup” “Digital Input” (see page 52).
Note:
If the DVD player has both 5.1-channei audio outputs and 2-
channel audio outputs, and you want to connect Che DVD player
only using the FRONT L/R jacks on the TX-SR701/701E/601/
601E, use the 2-channel audio output jacks on Che DVD player.
18