White Rodgers F145-1082 User Manual

White-rodgers

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

WHITE-RODGERS

F145-1082

Replacement Door for 1F90 & 1F97

Comfort-Set II Digital Thermostats

INSTALLATION INSTRUCTIONS

Before installing the new door onto your digital thermo­

stat, you will need to attach one of the two operating

instruction labels to the new door.

HOLD

COPY

1. Determine the type of thermostat you have. If the two

buttons on the far right of the thermostat look like

fig.1

, you will use the label numbered

153-2324

(for

the 1F97).

If the two buttons on the far right of your thermostat
look like

fig.2

, you will use the label numbered

153­

2325

(for the 1F90).

2. Place the thermostat door on a table and position it so

that the recessed area is facing up, and the door is

positioned as shown in fig. 3.

3. Peel the backing off the label you will use. Working

from the upper edge, lay the label in place on the
door. Gently wipe the label down to remove any air

bubbles.

4. To install the door, insert the extruded dimples into

the recesses located on the lower right and left edges

of the thermostat (it may be necessary to bend the
door slightly to fit it into place).

RUN

PRGM

Figure 1

HOLD

TEMP

ADV

PRGM

Figure 2

WHITE-RODGERS DIVISION

EMERSON ELECTRIC CO.
9797 REAVIS ROAD

isMisnsDN ST. LOUIS, MISSOURI 63123-5398

Printed in U.S.A.

PART NO. 37-4466B

Replaces 37-4466A

9824

Advertising
Table of contents