Amana ARR624 - Manual (Page 17)

Maintenance
Removing the Oven Door
The oven door can be removed for ease in
cleaning.
1. Open the door to the first stop.
2. Grasp the door firmly on each side and lift it
upward off the hinges. Do not push the
hinges closed once the oven door is removed.
The oven hinges are difficult to open without
the door in place.
Replacing the Oven Door
1. Make sure the hinges are open to the first
stop position. If the hinges have been closed,
carefully pull them open to the first stop. Align
the door with the hinge arms.
2. Slide the door down and into place. Be sure
the door is completely down on the hinges.
ACAUTION
To avoid personal injury or property
damage, handle the oven door with care.
The door is heavy and can be damaged if
it is dropped.
Do not place hands in hinge area when the
door is removed. The hinge can snap
closed and pinch your hands.
The door contains tempered glass. If the
glass is scratched, chipped, twisted or
impacted it may break suddenly. If the
door glass appears damaged it should be
replaced immediately.
Replacing the Oven Light
Protective gloves must be worn when changing
the light bulb.
1. Disconnect the electrical supply.
2. Remove the oven door if desired.
3. Unscrew the bulb cover counterclockwise.
4. Unscrew the light bulb counterclockwise.
5. Replace the light bulb with a 120-volt, 40 watt
appliance bulb. Do not overtighten the bulb.
A bulb that has been overtightened can
become difficult to remove.
6. Replace the bulb cover. Do not overtighten
the bulb cover. A bulb cover that has been
overtightened can become difficult to remove.
7. Replace the oven door.
8. Reconnect the electrical supply.
AWARNING
To avoid the risk of burns or electrical
shock, disconnect the electrical supply to
the oven, when replacing the oven light.
Before attempting to replace the bulb make
sure it is cool.
Wear protective gloves.
Do not operate the oven without the bulb
cover in place.
17