SINGER 111W150 - Manual (Page 2)

INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the PART number In
the FIRST column.
The number stamped on a Sewing Machine Part Is the num­
ber of the single Part only, except when the part Includes
Set Screws, Clamping Screws, Studs and Rollers Spun on.
Small Wires riveted, or Parts soldered together, etc.,which
It Is necessary to furnish In combination.
Every combination of parts sent out has its specific
number which, although not stamped on Parts (except In
above case), must be used when ordering the combination.
Each number always Indicates the 3A№ PART In whatever
list It appears, or for whatever Machine.
The letters after some of the numbers Indicate the
style of finish only, as follows:
A. Hardened, Polished, Nickel Plated and Buffed.
B. Polished, Nickel Plated and Buffed.
C. Hardened only.
D. Polished only.
E. Soft, not polished.
F. Hardened and Polished.
H. Blued.
J. Nickel Plated only.
R. Merllzed.
X. Black Oxide.
XC. Hardened and Black Oxide.
Y. Blade Nickel only.
These letters MUST BE USED when they appear In the list
and AFTER the number, as In the list.
In this series;
EOOOOl to 201500 and 350001 to 351500 are Screw Numbers.
201501 to
201800 and 351501 to 351800 are Nut Numbers.
201801 to 202000 and 351801 to 352000 arc Roller Numbers.
202001 to 350000 are Numbers of Machine Parts.
The figures In the second column refer only to the
plate in Which the Illustration of the part Is shown and
are NOT TO BE USED In ordering.
Two or more numbers over a cut Indicate that the dif­
ference between such parts is not visible In an Illustra­
tion.
Parts marked with an asterisk (•) are furnished when
repairs are made at the factory.
LIST OF PARTS COMPLETE
FOR
MACHINE No. Illwl50
HIGH SPEED. BALL BEARING.
COMPOUND FEED. KNEE LIFTER.
POSITIVE STITCH REGULATION.
For Clothing, Cloaks, Suits, Overalls, Duck Coats,
Oil Clothing, Shirts, etc.
No.
»248401
Plate
Arm
Name
with 202135
224002 16G03 II Cap
20027811 1660,3 II " Screw
202248 16603 " " Washer
204235 16613 II Position Pin (2)
200004E 16613 II Screw (3)
202005 16613 tl " Washer (3)
248440 16603 II Shaft with 224392 and 350431E
249440 16603 11 " Ball Bearing
*240054 16606 " " " " Collar with two
24CX355 16603
200378C
Arm Shaft Ball Bearing Collar 240054 with
2OO070C 16600
249440
Arm Shaft Ball Bearing Collar Set Screw
*240056 16603 II " " " Retaining Washer
*240053 16603 II " Bushing (back)