SINGER 147-106 - Manual (Page 10)

18 PARTS FOR MACHINE No. 147-107
No. Plate
1296C .........
26276 20565
131571 .........
220J .........
131572 .........
131359 .........
131573 20598
131071 20598
Name
" " Stop Screw
" " Hinge Pin.............................................
" " Knife.................................................
" " Screw.......................................
" " Plate.................................................
Shank..............................................
Presser Foot (hinged) with Chalnlng-off
Plate and Knife complete, for 1/32
In. gauge, N03. 1296C, 20178, 26276,
131356, 131359, 131571, 131572 and
two 220J............................................................
Throat Plate, for 1/32 In. gauge, for
131060, In place of 131558..............................
19
A\ACHINE No. 147-108
Foi Seat Seaming Medium Heavy and Heavy Trousers.
Two needles, two loopers. Needles set tandem 3/16 inch apart.
Ball bearing. Needle bar stroke I 3/8 inches. The loopers are
arranged so that they may be thrown out of position for con­
venience in threading. An improved oiling system automatically
oils all of the principal bearings of the machine.
Speed 3800 R. P. M.
NOTE: THIS MACHINE IS THE SAME ASTHE 147-104 MACHINE
WITH THE FOLLOWING EXCEPTIONS:
No. Plate
131487 20561
131510 -------
131379 20599
131386 .........
131392 -------
131559 20596
131292 20594
26276 20565
131560 -------
131513 -------
131561 20596
131562 20596
Name
Arm Rotary Shaft In place of 131476....................
" " " 131487 with 640E, 68459,
131111 and 131502, In place of 131485
Cloth Plate Slide (right) 9/64 In. Throat
Plate clearance cut, for 131386, In
place of 131376.................................................
Cloth Plate Slide (right) complete (9/64
In. Throat Plate clearance cut) for
131392, Nos. 131379, 131381 and two
725J, In place of 131383..................................
Cloth Plate complete, for Throat Plates
with 9/64 In. offset. Nos. 131051,
131374 and 131386, In p:t#ce of 131389
Feed Dog, 12 teeth (8 teeth to the Inch)
for 131562, In place of 131551.......................
Presser Bar Bushing (lower) In place of
131006...............................................................
Presser Foot Hinge Pin...........................................
" " Plate.................................................
" " Shank..............................................
Ph-esser Foot (hinged) complete,Nos. 26276
131513 and 131560, In place of 131.557
Throat Plate for 131559, In place of
131558...............................................................