Efore you call, Efore – Maytag MAH5500B User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EFORE
You
C
all
CONT.
C
heck
these
points
if
your
M
aytag
N
eptune
®
washer
...
t
Won’t Fill
•
Be sure the door is tightly closed.
•
Plug cord into a live electrical outlet. (Tub light should illuminate).
•
Check fuse or reset circuit breaker.
■
Press the start/pause pad.
•
Turn both faucets on fully.
•
Straighten inlet hoses.
•
Disconnect hoses and clean screens. Hose filter screens may be plugged.
•
Open and close the door, then push the start/pause pad.
Won’t Tumble
•
Check fuse or reset circuit breaker.
•
Close the door and press the start/pause pad. For your safety, the clothes washer will not
tumble or spin unless the door is closed.
Door Locked Shut;
Will Not Open
•
Press the start/pause pad to stop the machine.
•
It may take a few moments for the door lock mechanism to disengage.
Freshening
Your Washer
•
Open the door and wash the lower portion of the gray door seal with a solution of
1
cup
chlorine bleach to
2
cups water.
•
Select the following control panel setting: Cotton/Sturdy, Hot/Cold, Heavy soil setting.
•
Fill the bleach dispenser cup with liquid chlorine bleach and start the washer.
•
Pour an additional 1/2 cup bleach into the detergent dispenser as the washer is filling.
•
Allow the washer to complete the cycle.
•
At the end of the cycle, open the door and dry the gray door seal.
is Noisy
•
Clothes washer should be leveled properly as outlined in installation instructions.
•
Check the leveling leg lock nuts are tightened.
•
Be sure rubber feet are installed on leveling legs.
•
Weak floors can cause vibration and walking.
•
For information on normal operating sounds, see page 12.
For further assistance, cal! Maytag Customer Service toll-free at 1-888-4-MAYTAG (1-888-462-9824).
U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
I I