SINGER 105-1 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the part NUMBER In the
FIRST column.
The number stamped on a Sewing Machine Part Is In every
case the number of .the single part only.
Every combination of parts sent out as such has Its spec­
ific number, which, although not stamped on the parts, must be
used when ordering the combination.
Each number always Indicates the SAME PART In whatever list
It appears, or for whatever machine.
The letters after some of the numbers Indicate the style of
finish only, as follows:
A-Hardened, Polished, Nickel Plated and Buffed
B-Pollshed, Nickel Plated and Buffed
C-Hardened Only
D-Pollshed Only
E-3oft, Not Polished
F-Hardened and Polished
F.J-Hardened, Polished and Nickel Plated
Q-Brlght Rumbled and Nickel Plated
H-Blued
J-Nlckel Plated Only
K-Hardened and Nickel Plated
L-Brass Plated
M-Oildlzed
N-Japanned, Dull
P-Japanned, Bright
R-Merllzed
S-Cadmlum Plating
T-Copper Plated
T.A-Hardened, Polished, Copper and Nickel Plated and Buffed
T.B-Copper and Nickel Plated and Polished
T.J-Copper and Nickel Plated Only
T.K-Hardened, Copper and Nickel Plated
T.M-Copper Plated and Oxidized
T.L-Copper and Brass Plated
U-Zlnc Plated
V-Sllver Plated
W-Pollshed and Nickel Plated
Y-Black Nickel Plated Only
Z-Chromlum Plated
Z.B-Pollshed, Nickel Plated, Buffed and Chromium Plated
Z.J-Nlckel and Chromium Plated
These letters MUST BE USED when they appear In the list;
and AFTER the number as in the list.
In this series;
1 to 1500, 50001 to 51500 and 140001 to 142000
are Screw Numbers
1501 to 1800 and 51501 to 51B00 are Nut Numbers
1801 to 2000 and 51801 to 52000 are Roller Numbers
2001 to 50000 and 52001 to 140000 and 142001 to
190000 are Sewing Machine Parts, 190001 and upward
are numbers of Electrical Parts.
The figures In the second column refer only to the plates.
Illustrating the parts, and are NOT TO BE USED In ordering.
Parts marked with an asterisk (•) are furnished only when
repairs are made at factory.
LIST OF PARTS COMPLETE
FOR
\
MACHINE No. 105-1
For Stitching Harvesters’ Gloves. One needle, one looper;
cylindrical shaped throat plate. Makes seven to twelve stitches
to the inch. Speed 3500 R. P. M.
No. Plate Name
59301 Arm, upper and lower (solid) with 15404
and two 15405....................................................
59491 23579 Arm Rotary Shaft........................................................
•59609 ra69
ti
" " Bushing (back)..........................................
59610 " '' " " 59609 With
52045 and 59611................................................
59611 7369 Arm Rotary Shaft Bushing (back) Oil Wick
(braided cotton)................................................
52045 7369 Ann Rotary Shaft Bushing (back) Packing
(wick).................................................................
50554C 7369 Ann Rotary Shaft Bushing (back) Set
Screw..................................................................
59534 7369 Arm Rotary Shaft Bushing (front) with
53045..................................................................
52045 7369 Arm Rotary Shaft Bushing (front) Packing
(wick).................................................................