SINGER 114-21 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In orili^riiii' from this list, use ONLY the part NUMBER
in the FIJtiST cohiinn.
The nuni!)cr stamped on a SewiiiR Machine part is in every
case the niimher of the single part only.
Every conil>fnation of parts sent out as such has its specific
nuinhcr, whi(di, although not stamped on the parts, must be
used when ordering the combination.
Each number always indicates the S.VME P.\RT in whatever
list it ai)])cars, or for whatever machine.
'I’he letters after some of the numbers indicate the style of
finish onlv, as follows;
A-
li
C
V)
E
1'
11
■b
K
L
,M
1>
R
T-
T. A.-
T. B.
r. .1.
T. K.
T. M.
T. L.
tJ
w
z-
-Hardened, Polished, Nickel Plated and Buffed
- Polished, Nickid Plated and Buffed
-llurdened Only
Polished Only
Soft, Not Polished
-Hardened and Polished
- Blued
-Nickel Plated Only
Hardened and Nickid Plateil
-Brass Plated
-Oxidized
-JapaniK'd
-.Mei'lizisI
-(^op))er Plated
-Hardened, Poli.shed, ('upper and Nicked Plated
and Huffed.
-Co|)|)er and Nickel Plated and Polished.
- (lopiier and Nickel Plated Only.
-Hardened, Oo|)p(a- and Nickel Plated.
-('oppm- Plated and Oxitlizt'd.
-(dopp(;r and Brass Plated.
- Zinc Plateil
- Silver Plated
-I’olished and Nickel Plated
-Chromium Plated
'I'he.se letters.MIJST BE USED when they ap)>ear in the list;
and AEd'l'lR the number as in the list.
In this series:
1 to 1500 and 50001 to 51500 are Screw Numbers.
1501 to bSOO and 51501 to 51800 are Nut Numbers.
I,SOI to L’OOO and 51801 to 52000 are Roller Numbers.
2001 to 50000 and ,52001 and upward are numbers of
Machine Parts.
d'he figures in tlie second cohmm refer only to the plates,
Jllustrating the jiarls, and are NOT TO BE USED in ordering.
Parts marked with an tislerisk (*) are furnished only when
repairs are made at factory.
LIST OF PARTS COMPLET
FOR
MACHINE No. 114-21
FOR TACKING BANOS AND BOWS ON FELT OR STRAW HATS.
MAKES FIVE STITCHES, INCLUDING THE FASTENING
STITCH; HAS DOUBLE PRESSER FOOT, HINGED SO THAT
EITHER SIDE CAN BE THROWN OUT FOR CONVENIENCE
IN TACKING THE BOWS. FIHED WITH IMPROVED THREAD
CONTROLLING MECHANISM AND THREAD NIPPING DEVICE
TO HOLD THE END OF THE THREAD UNTIL THE FIRST
STITCH IS MADE.
NO. I’LATE N.AMB
♦62201 ------ Arm with 4449, 124793 and two 164 e . . . .
10532 ((976 " Dowel Pin .....................................................
4448 0970 “ Oil Tube, for intermediate hearing. . .
5(i015 (i970 “ “■ “ “ oiling ,59705 and 59700
880ic <)074 “ Screw.............................................................
,59702 9073 “ Shaft (horizontal)..........................................
17703 9002 “ “ “ Bushing (back)
50333<; 9074
Adjusting Screw.............................................
1520i'i 9075 Arm Shaft (horizontal) Bushing (back)
Adjusting Screw Nut......................................
♦4449 9002 .Ann Shaft (horizontal) Bushing (front). . .
59703 0970 “ “ “ Gear with two
1036c..............................................................