The straight stitch foot, The buttonhole foot, Changing the foot – SINGER W1260 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• The All Purpose Foot
This foot is flat on the bottom and has a wide hole to ac
commodate wide stitches. This foot should be used for all
normal sewing.
• The Straight Stitch Foot
This foot is flat on the bottom and has only a small hole to
a^ommodate only straight stitching. It may be used on
sheer or soft fabrics for more control when the all purpose
foot allows the fabric to be pulled with the needle.
• The Buttonhole Foot
This foot has a frame which holds the fabric taut enough
to produce a good buttonhole. The markings on the side
dilow exact buttonhole length to be made.
• Cording and Zipper Foot
"nils foot is very narrow, with needle opening cuts at its
right and left sides to sew in zippers and insert cording.
• CHANGING THE FOOT
Press the presser foot shank button toward you to remove
the foot (Step 1). To attach place the desired foot under
the shank and lower the presser bar (Step 21. Foot will be
locked automatically (Step 3).
Step 3
46