Instruction, Sheet, Instruction sheet – Maytag 12001908 User Manual
Page 2: Maywhg
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MAYWHG
Instruction
Sheet
16010951
6 2612390-1201
This instruction sheet is to be used with;
REPAIR PART NO.:
-f
2001908
(MPN 6 2306250)
DESCRIPTION:
LID SWITCH KIT
TOOLS REQUIRED:
Phillips Screwdriver
The purpose of this instruction is to inform you of changes made to the switch, making the
switch no longer adjustable. The lid switch mechanism is designed to shut off the machine if
the lid is lifted no more than 1-7/8" and will allow the machine to start when the lid is less than
1/4" high. The plunger is only used with Atlantis washers.
Note: The new lid switch (identified with a grey button) is now non-adjustable. You
cannot adjust by pulling on the lid switch button.
Procedures
1. Disconnect power.
2. Remove console to gain access to lid switch.
3. Lift lid slightly to remove pressure on the lid switch.
4. Remove lid switch and install new.
5. Reverse the afore mentioned steps.
6. Verify proper lid opening per measurements in the first paragraph.
7. If machine continues to not operate properly, please follow information shown on the follow
ing page.
.........over
240 Edwards Street. Cleveland. TN 37311