Maytag 12001908 - Manual (Page 3)

Dependable Care / Performa L Washers: the enclosed lid switch is interchangable with the
lid switch used on those machines. Checking lid switch performance;
1. If the switch functions, then you may need to adjust / bend the unbalance lever slightly
backward.
2. Verify proper lid opening again.
If the switch shuts off the machine after the lid is opened more than 1-7/8". bend the
unbalance lever toward the back.
If the switch shuts off the machine when the lid is lower than 1/4”. bend the unbalance
lever toward the front.
Atlantis washers: In addition to the new lid switch, a change was also made to the length of
the plunger.
1. Verify proper lid opening again.
If the switch shuts off the machine after the lid is opened more than 1-7/8". check the
items listed below.
If the switch shuts off the machine when the lid is lower than 1/4”. use the enclosed
plunger and check the items listed below.
Other items that could be interpreted as a problem related to the lid switch, are as
follows:
• Lid "oil canning" or chipped porcelain where the lid interfaces with the switch (or cam for
Atlantis). The lid may need to be replaced.
• Lid hinges or hinge balls either not inserted into the lid properly or cracked.
• fAtlantis only) Hinge bushings mounted into the top may be cracked or worn.
• (Atlantis only) Check the cam on the back flange of the lid to make sure it is not worn or
broken.