Chapter 5. twin-needle stitching, Procedure, Chapter 5. twin-needie stitching – SINGER 5102 User Manual

Page 26

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Chapter 5. Twin-Needle Stitching

The twin-needle simultaneously produces two

parallel, closely spaced lines of pattern stitch­
ing. You can stitch with either one or two col­

ours of thread.

Twin-needles No. 2011 must be purchased
separately at your local Sewing Centre.

• Needle Position: .L [JJ A only

I only ^

• stitch Width:

• Stitch Length: .5 - 4 to suit fabric

• General Purpose Needle Plate

• General Purpose Foot

Procedure

• Insert twin-needle.

• Thread as for single-needle stitching,

except

pass thread between

centre

and

back

tension

discs A, and through

left

eye of needle.

• Place second spool of thread on right spool

pin and felt.

• Thread machine in usual way,

except

pass

thread from second spool between

centre

and

front

tension discs B, as shown.

• Thread through remaining points, making

certain to

omit the thread guide above the nee­

dle

and pass thread through

right

eye of nee­

dle.

A CAUTION: Do not use a stitch width greater than what is recommended. A wider stitch will result in needle breakage.

24

Advertising