SINGER 112W140 - Manual (Page 4)

¿TRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the PART number In
the FIRST column.
The number stamped on a Sewing Machine Part Is the num­
ber of the Single Part only, except when the part Includes
Set Screws, Clamping Screws, Studs and Rollers Spun on,
Small Wires riveted, or Parts soldered together, etc.,which
It Is necessary to furnish In combination.
Every combination of parts sent out has Its specific
number which, although not stamped on Parts (except In
above case), must be used when ordering the combination.
Each number always indicates the SAME PART In whatever
list It appears, or for whatever Machine.
The letters after some of the numbers indicate the
style of finish only, as follows:
A. Hardened, Polished, Nickel Plated and Buffed.
B. Polished, Nickel Plated and Buffed.
C. Hardened only.
D. Polished only.
E. Soft, not polished.
F. Hardened and Polished.
H. Blued.
J. Nickel Plated only.
R. Merllzed.
X. Black Oxide.
XC. Hardened and Black Oxide.
Y. Black Nickel only.
These letters MUST BE USED when they appear In the list
and AFTER the number, as In the list.
In this series:
200001 to 201500 and 350001 to 351500 are Screw Numbers.
201501 to 201800 and 351501 to 351800 are Nut Numbers.
201801 to 202000 and 351801 to 352000 are Roller Numbers.
202001 to 350000 are Numbers of Machine Parts.
The figures In the second column refer only to the
plate In which the Illustration of the part Is shown and
are NOT TO BE USED In ordering.
Two or more numbers over a cut Indicate that the d i f ­
ference between such parts Is not visible In an Illustra­
tion.
Parts marked with an asterisk (») are furnished when
repairs are made at the factory.
LIST OF PARTS COMPLETE
FOR
INE No. II2wl40
/’two
NEEDLE HIGH SPEED COMPOUND FEED
BALL BEARING, SAFETY CLUTCH
For Corsets, Cloaks and Clothing Generally
Made in gauges irom 1/32 to I 1/2 inches.
No. Plate
,:4S401 —
224002 17 811
20027 81117811
20'i’2 48 17 8.11
204235 17 806
200004E 17 80 6
202005 17806
24B440 ro’ii
'249440 17811
240054 17 8 LI
240055 17811
2003780 17811
Name
.iv.nn with lOttlhh
" (iap
” " Scrow
” " " V/asher
" Position Pin (2)
Screw (3)
" " Washer (.3)
" Shalt with 221392 and 550131F,
" " Bail Bearing
" " " " (ioJlai' wlLii two
iiOOoVUC
ilraii Shaft Hail Bearing Collar 240UB4
with 24 94 40
/'irm Shaft Ball Bearing Co.Ilar Set
Scrow