SINGER 147-5 - Manual (Page 21)

40 THREAD UNWINDER
No.
259144
27739
225390
Name
Thread Unwinder complete. Nos. 201696J,
202490, 225324, 225326, 225388, two
225257, four each 150203, 225391 and
three wood screws 7/8 In. No. 12....
Thread Cone (wood) for large cones................................
“ " Holder for inverted cones...
Note; Nos. 27739 and 225390 are used with, but not
Plate
20694
20694
20694
Included In 225258.
Cenuin« Singer Needles should be used
in Singer Machines.
These Needles and their Containers
are marked with the
Company's Trade Mark “SIMANCO.** 1
Needles in Containers marked
“For Singer Machines’*
are not Singer made needles.
41
OBSOLETE PARTS
No. Plate
54005 8901
54008 8901
1259C 8958
430C 8904
54088
50069C 8904
1516J 8904
64268 8904
54897 8904
54149 9895
50200C 8958
68204 9895
50200C 8958
68205 9896
54106 9883
54107 9883
171D 8958
68223 9879
51072E 9901
51581E 9901
6055 9900
49123 8996
60884 8985
57285
68224 8996
54062
Name
Arm Rock Shaft Crank (back) with two
50083C...............................................................
Arm Rotary Shaft Collar with three
1259C, for 68111 and 68212, use
54450..................................................................
Arm Rotary Shaft Collar Set Screw for
54008..................................................................
Balance Wheel Set Screw for 54210........................
Crank Connecting Rod 54017 with 50069C,
use 131344..........................................................
Crank Connecting Rod Ball Screw Stud for
54088..................................................................
Crank Connecting Rod Ball Screw Stud Nut
tt n H H H H II
Washer...............................................................
Crank Connecting Rod Oil Cup, use 68350.
Feed (upper) Lifting Regulator with
50200C, use 131711...........................................
Feed (upper) Lifting Regulator Set Screw
for 54149............................................................
Feed (upper) Lifting Regulator Shaft for
147-6 and 147-37 Machines.............................
Feed (upper) Lifting Regulator Shaft
Crank Set Screw for 54152..............................
Lifting Presser Bar Lifting Bracket with
462C and 1872 for 147-6 and 147-37
Machines, use 68351.........................................
Looper (back) closed eye, for 147-37 Ma­
chine, superseded by 131425, not In­
terchangeable....................................................
Looper (front) closed eye, for 147-37,
superseded by 131426, not Inter­
changeable ........................................................
Looper Carrier Adjusting Screw for 54027
Machine Base.............................................................
” “ Bolt with 51581E................................
" " " Nut............................................
" .......................Washer.............................
" " Oil Pipe...........................................
" “ " " Plug................................
” Cushion (felt)...................................................
Machine Base complete. Nos. 49123,60884,
68223, three each 6055, 51072E and
four each 948E and 57285, use 131320
Needle Bar complete for 3/16 In. to 1/4
In. gauges, for 147-37 Machine, Nos.
54064, 54065 and 64319, use 131045..