Regulating the presser foot pressure – SINGER W1755 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REGULATING THE PRESSER FOOT PRESSURE
1, Push down inner pin (Aj to increase pressure.
(Light to medium fabrics)
2. Push down outer ring to release pressure, (Heavy
fabrics)
3. Insufficient presstrre may cause poor feeding,
skipped stitches, or difficulty in guiding the fabric.
4, No pressure adjustment is required when darn
ing or sewing embroidery.
DROP FEED (Daring plate is an optional accessories)
There are a few times when you want to control the feeding of fabric by your
self.
Raise needle bar to its highest position and raise presser foot, place daring plate
over needle plate aligning two pins of darning plate with holes of needle plate.
You may then determine the movement of the fabric by yourself. See page 20
for button sewing application — 13 —