Removing bobbin case and bobbin, Inserting bobbin into bobbin case – SINGER W1750 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
REMOVING BOBBIN CASE AND BOBBIN
1. Raise needle to its highest
position
and
open
the
shuttle race cover.
Hinged latch
2. Open hinged latch of
bobbin case and pull bob
bin case out of macliine.
3. Release the latch and bob
bin will fall out easily.
INSERTING BOBBIN INTO BOBBIN CASE
1. Pull off 5cm of thread
from bobbin and insert it
into bobbin case as shown.
SLOT
he-'
2. Guide the end of thread
into slot.
Tension spring
10cm
/ \
l\
......i.
3. Pull into slot and under
tension spring and draw
out
about
10
cm
of
thread.
Advertising