Operating tips coni, Loading, Loadstnsor" agita1dr – Maytag MAV77 User Manual

Page 6: Ureakdafaning, Storing m mr, Operating tips, Storing, Coni

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

OPERATING TIPS

coni

.

LOADING

Put dry, unfolded clothes loosely in

the tub, up to the top row of holes for
a maximum load.

Do not wrap large items like sheets

around the agitator.

Mix large and small items for best
circulation. Wash bulky items like
blankets separately.

When laundering wrinkle free it<
or items of delicate construct

washable woolens or loosely

items, never use less than the ME
UM water level setting. This will n
mize shrinkage, wrinkling and pul

of seams.

For best results, add the deterger

washtub before adding the load.

Close lid carefully to avoid slamm

lOADStNSOR" AGITA1DR

The LoadSensor™ agitator is specially
designed to be sensitive to every load.
The spiral fins will move continuously
with large, heavy loads. With smaller,
more delicate loads, the spiral fins will
move intermittently, or with very light
loads, not at all. It is normal to notice a
difference in the agitator sound from
load to load.

UREAKDafANING

Turn off the water faucets after finishing

the day’s washing.

This will shut off the

water supply to the washer and prevent the
unlikely possibility of damage from escap­
ing water.

Use a soft cloth to wipe up all detergent,
bleach or other spills as they occur.

Clean the following as recommended:

Control Panel

- clean with a soft,

damp cloth and glass cleaner. Do

not use abrasive powders or clean­
ing pads.

Cabinet

- clean with soap and wate

Interior

- hard water deposits may

removed using a recommended f

water remover/cleaner labeled

m

er safe. Follow the cleaner manu
turer's directions for use, and m
sure the washer is run througi
complete cycle to rinse out

remaining cleaning substance.

STORING

m

MR

Washers can be damaged if water is not
removed from hoses and internal compo­
nents before storage. Prepare the washer
for storage as follows:

gar in the same wash. Hazardous
fumes can form.) Run the washer
through a complete cycle.

5

Select NORMAL on the WHITES cycle
and add one cup of bleach OR white
vinegar to a full load of water without
clothes. (Do not mix bleach and vine-

Turn the water faucets off and dis­
connect the inlet hoses.

If the washer has been store'

below - freezing temperatures,

i

time for the washer to thaw out pri

use.

• Disconnect the washer from the elec­

trical supply and leave the washer lid
open to let air circulate inside the tub.

After storage, select NORMAL or
WHITES cycle and run the wa
through a complete cycle.

Advertising
This manual is related to the following products: