SINGER 128-4 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the J’AIIT number in
the FIRST column.
The number stamped on a Sewing Machine part is in every
cas(> the number of the single part only.
Every combination of parts sent out. as such has its .specilie
number, which, although not. stam|>e(l on the ]iarts. must be
us(>(l when ordering the combination.
Each number always indicates f h(‘ SAME I’ART in whatever
list it appears, or for whatever machine.
'I'lie letters after some of the mmibers indicate the style of
linish only, as follows:
A. Hardened, Polished and Plated.
Polished and Plated.
Hardened only.
Polished only.
Soft, not Polished.
Hardened and Polished.
Blued.
'these letters MUST BE USED nimi they appear in th(> list,
and AFTER the number as in the list.
In this series
1 to PICO and -hOOOl to ol.hOO are Screw Numbers.
P501 to 1800 are Nut Numbers.
1801 to 2000 are Roller Numbers.
2001 to .50000 and 52001 and upward are numbers of
Machine Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NO't 'I'O BPl USED in ordering.
Parts marked with an asterisk (*) are furnished onlj' when
repairs are made at factory.
B.
C.
1 ).
E.
F.
H.
LIST OF PARTS COMPLETE
FOR
MACHINE NO. 128-3
FOR FAMILY USE, VIBRATING SHUTTLE VKITH SHUTTLE EJECTOR
NO. j’NATK NAMK KACH
'51501 -------- Arm with l lS.v and S20(!.............................. $5
2002 0408 '■ Dowel Pin....................................................... 02 -
S852 0401 " Rock Shaft with 122 k ................................ 70 -
122 k 0407 “ ■' " Adjusting Screw................. Oo
SHOO 0401! ....................... Centre (upi)ert.................. 10 -
tiOlA 0407 “ “ ■ Screw Centre.................... 08 -
1508 k til07 ......................................... . " N'0......... 00
1,‘!8K 0107 •• Screw...................................................... 05
8140 0401 '■ Shaft......................................................... 1 00
8201) 0408 “ “ Bushing........................................ -O
.4.4,8 a 0408 ■■ “ “ Set Screw................... 08 •
8427 0402 “ Side Cover................................................ “0
.50058U 0407 ..................... Thumb Screw....................... 10
2007 0408 “ Spool Pin...................................................... 02
8871» 0408 ......................Washer (cloth)...................... 01 -
15282 0400 Btilance Wheel, 2.C, in, pull(-y................... 1 00
'2841.5 B('d......................................................................... 00
2501! 0400 Clamp Stop Motion Clam]) Screw............ 80
248 a 0107 •• “ “ “ f4lo]) Scrtwv.. 02
2020 0400 “ " ■' ■' Washer......... 05
''1.5812 — “ ■' “ P1 a n g e (1 Btishing 85
1.5818 0400
1.5812 with two 402c.................................... 8-5
2022 0408 Clamp Stop Motion Flanged Bushing
Pin....................................................................... 01
■102c 0407 Clanit) Stop Motion Flangisl Bushing
S(4 Screw'......................................................... 02
15814 -- - Clamp Slfi|) Mot ion complete, Nos. 248 a ,
25011, 2020 and 15818..................................... 75
8801 0402 Face Plate with 2827..................... 50
2IDA 0407 “ “ Screw............................ 02
2827 0408 “ “ 'ihrt'ad (luard with 8.505,. . . 02
8505 0403 “ “ “ “ Rivet..|)cr 100 10
82502 ()408 Feed Cam with 1285c..................... 80
1285c 0108 •' “ Set Screw......................... 04
8218 754 “ Dog, without teeth at right of
needle.................................................................. 85