Instructions for ordering, Machine no. 147-35, List of parts complete – SINGER 147-35 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the part, NUMIIER
in llie KIKSd' column.
Tin; number .stamped on a Sewing Macliine part is in every
case tlui number of the single i)art only.
Kvery combination of parts sent out as such has its specific
number, \vhi<-h, although not stamped on the parts, must be
used when ordering the combination.
Laeh number always indicates the SAMK PART in whatever
list it ap]iears, or for whatever machine.
d’he letters after some of the numbers indicate the style of
linish only, as follows;
Hardened, Polished, Nickel Plated and Buffed
И - Polished, N’i(;kel Plated and Buffed
(' -llanhmed I )idy
1) ' Polished Only
L —Soft, Not Polislicd
h -Hardened and Polished
11
-Blued
.1 -Nii-kel Plated Only
К—Hardened and Nickel Plated
I. — Brass I'lated
-M -(txidized
N—.lapanned. Dull
P—J.4|);iuned, Bright
ft —Miaii/.ed
1’—(’oi>per Plated
T. A.—Hardened, Polished, (topper and Nickel Plated
and Bulfed
T. И.—Copper and Nick(d Plated and Polished
'Г. ,1.—Copper and Nickel I'lated Only
'Г. K.—Hardened, (.!op[)('r and Nickel Plated
T. .M. -—('(jpper Platisl and I ixidized
’]'. L.—Co))|)er and Biass Plated
C—Zme Plated
\'—Silver Plated
\\ - Polished and .Nick(d Plated
/. -Chroinium Plated
Z. B. — Polished, Nickel Plated, Buffed and (,’hioinium Plated
Z. J. -Nickel and (Ihroniiimi Plated
These lettei's M liST BL USKD when they ajijiear in the list;
and .VP risR the number as in the list.
Jn this series:
1 (o IhlK) and 50001 to 51.501) are Screw Numbers
1.501 to IStlO and 51501 to 51St)0 are Nut Numbers
1801 to 'dOOO and 51S01 to 52000 are Roller Numbers
20111 to 50U0U and 52t)01 ami upward are numbers of
Machine I’arts
The figures in the second column refer only to the plates,
illustrating the jiarts, and are N’O'J' 'TO BE liShll) in ordering.
Parts marked witii an asterisk (*) are furnished only' when
repairs are made at factory.
When ordering parts which differ as to Gauge (the distance
between .seaiiisl the Gauge, us well a.s the Number must be
given
o i l
order.
LIST OF PARTS COMPLETE
FOR
I, /1611
MACHINE No. 147-35
FOR STAYING SHOES. TWO NEEDLES. TWO LOOPEBS. TWO
THREAD
CHAIN
STITCH.
GAUGES
IN.
TO
IN.
THREAD NIPPING DEVICE. FOOT LIFTER. SPEED UP TO
3500
ACCORDING TO THE MATERIAL BEING STITCHED.
NAME
Arm, uiiper and lower (solid) with 918i) and
510:il..........................
Arm Oil Pad (liraided cotton) for oiling
-Vnn Roek Shaft Front Bearing..............
Ann Oil Pad (braided cotton) for oiling
.Vriii Rock Shaft Intermediate Bearing
Arm Oil 'Tube with 52045 for oiling 54321)
“
“
“ Packing (braided cotton)..
“ Roek Shaft..................................................
“
“
“
.54183 with 4(1383, 64004,
.54184 and (14255......................................
Ann Uoek Shaft Bushing (back)..................
“
“
“
“
“ Set Screw
“
“
“
“
(intermediate)
ii
U
i(
i(
U
Set Screw......................................................
•NO.
I’l.Vl'E
.51182
■ - --
4230(1
8001
50000
8001
.50003
80.S.5
.52015
8001
.54183
8038
.51102
01380
8001
440c
8001
04388
8001
423c
8001