Connecting foot controller and power cord – SINGER W1033 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Connecting Foot Controller
and Power Cord
Connect
foot
controller
and
power cord 0; 2),
Before plugging in your machine,
be sure that voltage is same as
that of your machine, (written on
a
plate at back of machine)
^Specifications vary from country
to country.
Switch
on
power
to
put
on
machine
and
turn
on
sewing
light.
Always switch off or unplug
machine when not in use.
The more you press foot controller,
the faster the machine runs.
_ 5 _
Advertising