Making buttonholes, Determine length, Determine width – SINGER W1099 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7. MAKING BUTTONHOLES
Set machine as shown.
Measure diameter and thickness
of button and add 0.3cm (1/8")
for bar tacks.
Mark buttonhole size on materia!.
Determine width according to
diameter of button, its thickness,
and kind of material.
Attach buttonhole foot.
Completely push back sliding part
@ of buttonhole foot.
Place material under foot so that
marking of buttonhole passes
through center of foot and arrow
CB;' of foot indicates beginning line
- 2 1