SINGER 114-28 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In ordarlng from this llet, use ONLY the part NIMBER In the
FIRST column.
The number stamped on 7 Sewing Machine Part Is In every case
the number of the single pan, only.
Every combination of parts sent out as such has Its specific
number, which, although not stamped on the parts, must be used
when ordering the combination.
Each number always Indicates the 3A№ PART In whatever list
It appears, or for whatever machine.
The letters after some of the numbers Indicate the style of
finish only, as follows:
A-Haixlened, Polished, NlcKel Plated and Buffed
A.A-Buffed and Chromium Plated
H.B-Hardened, Polished, Buffed and Chromium Plated
A.C-BroSim Baking Enamel rinlsh
A.D-Qray BaKlng Enamel Finish
A.E-Hardened, Bright Rumbled and Nickel Plated
A.F-Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled and
Chromium Plated
B-Pollshed, Nickel Plated and Buffed
C-Kardened Only
C.R-Hardened and Merllzed
D-Pollshed Only
E-Soft, Not Polished j|
F-Hardened and Polished
F.J-Hardenad, Polished and Nickel Plated
0-Brlghl Rumbled and Nickel Plated
H-Blued
J-Nlckel Plated Only
K-Hardened and Nickel Plated
L-Bras3 Plated
M-Qxldlzed
N-Japanned, Dull
P-Japanned, Bright
P.P-Wrlnkle Finish
R-Merllzed
S-Cadmium Plated
T-Copper Plated
T.A-Hardened, Polished, Copper and Nickel Plated and Buffed
T.B-Copper and Nickel Plated and Polished
T.J-Copper and Nickel Plated Only
T.K-Hardened, Copper and Nickel Plated
T.L-Copper and Brass Plated
T.M-Copper Plated and Oxidized
U-21nc Plated
V-Sllver Plated
W-Pollshed and Nickel Plated
X-Black Oxide, for Iron and Steel
X.C-Hardenod and Black Oxide, for Iron or Steel
Y-Black Nickel Plated Only
Z-Chromlian Plated
Z.A-Hai'dened,Polished,Nickel Plated,Buffed and Chromium Plated
Z.B-Poll8hed, Nickel Plated, Buffed and Chromium Plated
Z.C-HaxTlened and Chromium Plated
Z.D-Pollshed a.Td Chromium Plated
Z.O-Brlght Rumbled, Nickel Plated, Bright Rumbled and Chromium Plated
Z.J-Nlckel and Chromium Plated
Z.T-Copper and Chromium Plated
These letters MUST BE USED when they appear In the list; and
AjTER the number as in the list.
In this series:
1 to 1500, 50001 to 51500 and 140001 to 142000
are Screw Numbers
1501 to 1800 and 51501 to 51800 are Nut Nxanbers
1801 to 2000 and 51801 to 52000 are Roller Numbers
2001 to 50000 and 52001 to 140000 and 142001 to
IDOOOO are Sewing Machine Parts, 190001 and upward
are numbers of Electrical Parts.
The figures In the second colinn refer only to the plates,
lllusti-atlng the parts, and are NOT TO EE USED In ordering.
Porte marked with an asterisk (*) are furnished only when
repairs are made at factory.
LIST OF PARTS COMPLETE
FOR
MACHINE No. 114-28
For Sewing Two or Four Hole Buttons, froin 10 to 50 ligne.
Makes cross stitches in four hole buttons and can be adjusted
for two hole and bar buttons. Makes 14 stitches, including the
fastening stitch. Thread cutter. Clamp vibrates Across the cylinder.
Speed 1500 R. P. M.
No. Plate Name
*124845 Arm
*62295
N
124845 With 4449, 15404, 124793 and
two each 164E and 15405.....................................
16532 23167 Arm Dowel Pin.............................................................
4448 23167
0
Oil Tube, for Intermediate bearing..
56015 23167
m * " ■ oiling 59705 and 59706
136594 Arm Oil Tube, for oiling Needle Bar Con-
nectlng Link (upper) Bearing
880E 23167 m Screw....................................................................
59702 23167 0
Shaft (horizontal)..................................................
•136540 Ann Shaft (horizontal) 59702 with 59757,
59774 and 68717
17703 23167 Arm Shaft (horizontal) Bushing (back)...
50333C 23167 0
" “ * " Ad-
Justing Screw.......................................................
1520J 23167 Arm Shaft (horizontal) Bushing (back)
Adjusting Screw Nut............................................