SINGER 136W105 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the PART number in
the FIRST column.
The number stamped on a Sewing Machine Part is the
number of the Single Part only, except when the part includes
Set Screws, Clamping Screws, Studs and Rollers Spun on. Small
Wires riveted, or Parts soldered together, etc., which it is
necessary to furnish in combination.
Every combination of parts sent out has its specific number
which, although not stamped on Parts (except in above case),
must be used when ordering the combination.
Each number always indicates the SAME PART in what­
ever list it appears, or for whatever Machine.
The letters after some of the numbers indicate the style of
finish only, as follows:
A—Hardened, Polished, Nickel Plated and Buffed.
Al—Heat Treated for Toughness.
ALX—Heat Treated for Toughness and Black Oxide.
B—Polished, Nickel Plated and Buffed.
C—Hardened only.
D—Polished only.
E—Soft, Not polished.
F—Hardened and Polished.
J—Nickel Plated only.
R—Merlized.
X—Black Oxide, for Iron and Steel.
XC—Hardened and Black Oxide, for Iron and Steel.
Y—Black Nickel Plated only.
Z—Chromium Plated.
These letters MUST BE USED when they appear in the
list and AFTER the number, as in the list.
In this series
1 to 1500, 200001 to 201500 and 350001 to 351500 are
Screw Numbers.
1501 to 1800, 201501 to 201800 and 351501 to 351800 are
Nut Numbers.
1801 to 2000, 201801 to 202000 and 351801 to 352000 are
Roller Numbers.
2(X)1 to 50000 and 202001 to 350000 are Numbers of
Machine Parts.
The figures in the second column refer only to the plate
in which the illustration of the part is shown and are NOT TO
BE USED in ordering.
Two or more numbers over a cut indicate that the differ­
ence between such parts is not visible in an illustration.
Parts marked with an asterisk (*) are furnished only when
repairs ore made at the factory.
LIST OF PARTS COMPLETE
FOR
MACHINE No. I36wl05
VERTICAL HOOK. POST BED.
CONTINUOUS WHEEL FEED.
BALL BEARING ROLLER PRESSER.
Horizontal Undertrimmer attached to Hook Post.
For Simultaneously stitching the edges and undertrimming the linings
of Shoes, Sandals, Slippers, etc.
No. Plate Name
♦ 2U90()9 Arm with ¿02135
21*9001 '' Base
201*235 1 7330 " " Position Pin (2)
20000l*E 17330 " " Screw (3)
202005 17330 " " '■ Washer (3)
203091 17325 '■ Cap
200278X I 7325 " " Screw
20221*8 17325 " ” '' Washer
203089 17325 ” " Spool Holder Base
203090 17325 " ” " '■ ” 203089
200079X and 20^296