Before sewing – SINGER W1444 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
BEFORE SEWING
ton foot
Connect light cord, motor
wire 2 plugs into power
supply separately.
r foot
adle
# 1 4
1. Remove or install bulb from
inside of face cover.
2. Open face cover in direction
of arrow,
3. Remove bulb by unscrewing
it counter clockwise.
4. Install a new bulb by screw
ing it in clockwise.
5. Use a screw type bulb with
120V/15W. (Max)
Advertising