SINGER 114-39 - Manual (Page 9)

16
No. Plate
124788 23156
1235F 23156
62128 23156
62129 23156
50018F 23156
1547J 23156
59739 23156
62130 9594
3021 9594
59739 23156
236F 23156
124803 23154
202J 23154
7071 23154
124625 23151
42808 23151
62171 23151
337J 23151
62172 23151
124626
691F 23151
39452 23151
124806 23151
33UJ 23151
1207D 23151
124777 23151
136556
641C 23151
39455 23151
39456 23151
1302D 23151
124789 23156
124955 23156
124778 23156
206D 23156
691F 23156
17872 23153
1196C 23153
17873 23153
1182E 23153
17874 9599
1901 9599
PARTS FOR MACHINE No. 114-39
Name
Thread (lower) Pull-off Bar Guide and
Knife Holder..................................................
Thread (lower) Pull-off Bar Guide Screw.
" ' ■ Holder with 59739
* " * ' Cap with
59739..............................................................
Thread (lower) Pull-off Holder Cap Screw
17
Nut.
•15404
15405
Thread (lower) Pull-off Holder Cap Stud.
" " « « Connection
m m m m m
Rivet...............................................................
Thread (lower) Pull-off Holder Stud...................
" • * Screw............................
(upper) Pull-off (double)........................
' • Screw......................
* » • waeher....
Take-up Body with 62172......................
* Roller.......................................
* * Cap.................................
' « « Screw....................
” “ ” Pin..................................
Thread Take-up complete. Nos.3373,42808,
62171 and 124625..........................................
Thread Take-up Screw.........................................
* Wiper Body.............................................
* " * Finger................................
“ " " “ Screw......................
" ‘ * Hinge Screw.........................
* " • Support.............................
Thread Wiper Body Support 124777 with
1207D,1302D,39452,39455 and 39456...
Thread Wiper Body Support Set Screw.............
" • * Wire.......................................
• * * “ Clamp.........................
• ■ * ■ • Screw................
Throat Plate with 124615......................................
Throat Plate complete. Nos, 208D, 1547J,
17718, 50018F, 62128, 62129, 124684,
124778,124788,124789,124804 and two
each 206D, 236F and 1235F.........................
Throat Plate Needle Guard..................................
" * " " Screw.....................
• * Screw...........................................
Trip Lever..............................................................
" " Hinge Screw.........................................
* * Spring...................................................
* • ■ Screw.....................................
Tripping Point.......................................................
" " Screw............................................
Trade Mark...........................................................
* • Rivet....................................................
MACHINE No. 114-41
For Tacking Paper Tickets on Clothing to Distinguish Lot,
Color, Size, etc., while in process of Manufacture. Triangular
tack, 14 stitches, base toward operator. Thread cutter, leaves
long end to unravel projecting on top of the material. Speed
1500 R. P. M.
NOTE; THIS MACHINE IS THE SAME AS THE NO. 114-39 MACHINE,
WITH THE FOLLOWING EXCEPTIONS;
No. Plate Name
136564 9598 Clamp with 1220E, 17928 and 136565, In
place of 136557....................................................
*136565 — Clamp Loop Finger......................................................
136580 Clamp complete. Nos. 1656J, 62259 and
136564, In place of 136558.................................
124801 9600 Feed Cam with two 1192C,three each 190J,
17874,124616,124622 and twelve 335J,
In place of 136559...............................................
18415 9595 Feed Cam Driving Worm with 1441C and
1442C, In place of 39211....................................
17797 9600 Feed Cam Driving Worm Wheel with 453C,
for 62264..............................................................
*62264 Feed Cam Shaft 62155 with 1653C and
17797, In place of 55419.....................................
124802 9598 Feed Plate, In place of 136560....................................
124616 9600 Thread Nipper (lower) Cam, In place of
136562..................................................................
124621 23155 Thread Nipper (lower) Lever with 237K,
In place of 136563...............................................
124622 9600 Thread Nipper (lower) Lever Guide..........................
335J 9600 “ " • " " Screw.