Canon EOS 5D - Manual (Page 129)

129
wPrinting with PictBridge
With step 4, select the item. When
is displayed, press the
<C> button. You can then set
the parameters for fine adjustments.
The parameters that can be adjusted
for the selected item are shown in the
table below.
Turn the <5> dial to select the item
to be adjusted, then press <0>.
Printing Adjustments (k: Adjustable)
Adjustment of Printing Effects
Item
Off / On / Vivid /
Natural
Natural M
B/W / Cool tone /
Warm tone
Brightness k k k
Adjust levels – k k
k Brightener k k k
Red-eye corr. k k k
Detail
set.
Contrast
–
k k
Saturation k
– Color tone k
Color balance k
After making fine adjustments for the printing effect, if you do step 4 again to
change the printing effect’s setting, the adjustments will all revert to the
default.
When [Default] is selected, the printing adjustments can not be adjusted.