Jself-timer operation – Canon EOS 5D User Manual

Page 48

Advertising
background image

48

Use the self-timer when you want to be in the picture.

1

Press the <R> button.

(9)

2

Select <j>.

Look at the LCD panel and turn the
<6> dial to select <j>.

3

Focus the subject.

Look in the viewfinder and press the
shutter button halfway to check that
the focus confirmation light is on and
the exposure setting is displayed.

4

Take the picture.

Look through the viewfinder and
press the shutter button completely.

X

The beeper will sound, the self-timer
lamp will blink, and the shot will be
taken about 10 sec. later. During the
first 8 sec., the beeper beeps slowly
and the lamp blinks slowly. Then
during the final 2 sec., the beeper
beeps faster and the lamp stays lit.

X

During the self-timer operation, the
LCD panel counts down the seconds
until the picture is taken.

j

Self-timer Operation

Do not stand in front of the camera when you press the shutter button to
start the self-timer. Doing so will throw off the focus.

Use a tripod when you use the self-timer.

To cancel the self-timer after it starts, press the <R> button.

When using the self-timer to shoot only yourself, use focus lock (p.79) for
an object at about the same distance as where you will be.

You can also silence the beeper. (p.99)

Advertising