SINGER 144W202 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
LIST OF PARTS COMPLETE
FOR
In ordering from this list, use ONLY the PART number In
the FIRST column.
The number stamped on a Sewing Michlne Part Is the num­
ber of the Single Part only, except when the part Includes
Set Screws, Clamping Screws, Studs and Rollers Spun on.
Small Wires riveted, or Parts soldered together, etc.,which
It Is necessary to furnish In combination.
Every combination of parts sent out has Its specific
number which, although not stamped on Parts (except in
above case), must be used when ordering the combination.
Each number always Indicates the SAflE PART In whatever
list It appears, or for whatever Michlne.
The letters after some of the numbers Indicate the
style of finish only, as follows:
A. Hardened, Polished, Nickel Plated and Buffed.
B. Polished, Nickel Plated and Buffed.
C. Hardened only.
D. Polished only.
E. Soft, not polished.
E. Hardened and Polished.
H. Blued.
J. Nickel Plated only.
R. Merllzed.
X. Black Oxide.
XC. Hardened and Black Oxide.
Y. Blade Nickel only.
These letters MUST BE USED when they appear In the list
and AFTER the number, as In the list.
In this series:
200001-to 201500 and 350001 to 351500 are Screw Numbers.
201501 to 201800 and 351501 to 351800 are Nut Numbers.
201801 to 202000 and 351801 to 352000 are Roller Numbers.
202001 to 350000 are Numbers of Machine Parts.
The figures In the second column refer only to the
plate In which the Illustration of the part Is shown and
are NOT TO BE USED In ordering.
Two or more numbers over a cut Indicate that the d i f ­
ference between such parts Is not visible In an Illustra­
tion.
Parts marked with an asterisk (*) are furnished when
repairs are made at the factory.
MACHINE No. I44w202
Single Needle Lock Stitch Machine with Compound
Feed and High Lift Alternating Pressers.
For Stitching Pockets in Automobile Door Panels
and Tarpaulins, Awnings and Similar Work.
Has a high arm with a working space of 20 inches
to the right of the needle.
N;une
Arm with two 240174
Cap
" Screw
"
'' Washer
Cover
" Screw (2)
Cross Shaft
Bushing with 202260
Plate
16137
16131
161,31
16140
No.
»264639
224002
20027RH 16137
202240
16137
265003
200166H
16140
265073> 16140
265074
202260
200383C
200383C
265075
16140
16140
16140
16140
16140
201220C 16140
200382C 16140
" Oil Packing (wick)
" Set Screw
"
" " Check Screw
Gear with 200382C and
201220C
Ai-m Cross Shaft Gear Position Screw
" " " " Set Screw