Instructions for ordering – SINGER 114-20 User Manual

Page 2

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image


In ordering from this list, use ONLY the part NUMBER

in the FIRST column.

The number stamped on a Sewing Machine part is in every

case the number of the single part only.

Every combination of parts sent out as such has its specific

number, which, although not stamped on the parts, must be

used when ordering the combination.

Each number always indicates the SAME PART in whatever

list it appears, or for whatever machine.

The letters after some of the numbers indicate the style of

finish only, as follows;

A. Hardened, Polished and Plated

B. Polished and Plated.

C. Hardened only.

D. Polished only.

E. Soft, not Polished.

II. Blued.


Plated only.

K. Hardened and Plated.



M. Oxidized.

P. Japanned.

These letters MUST BE USED when they appear in the list,

and AFTER the number as in the list.

In this series

I to 1500 and 50001 to 51500 are Screw Numbers.

1501 to 1800 are Nut Numbers.
1801 to 2000 are Roller Numbers.

2001 to 50000 and 52001 and upward are numbers of

Machine Parts.

The figures in the second column refer only to the plates,

illustrating the parts, and are NOT TO BE USED in ordering.

Parts marked with an asterisk (*) are furnished only when

repairs are made at factory.

This manual is related to the following products: