Accessories and tools needed, Accessories, Tools – Maytag SERIES NINE HE2940L User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Accessories and Tools Needed
Accessories
To simplify the installation Maytag has available the installa
tion parts shown below. You may or may not need all of these
accessories depending on your type of installation. Call
Maytag Customer Service at 1-800-788-8899 for an autho
rized installer.
EXPANSION TANKS FOR THERMAL EXPANSION
CONDITIONS AVAILABLE IN
2
GALLON (PART
NUMBER 66001013) AND 5 GALLON (PART
NUMBER 66001014) CAPACITY
DRAIN PANS AVAILABLE IN 22" DIAMETER (PART
NUMBER 66001011) FOR WATER HEATERS HAVING
A DIAMETER 20" OR LESS, 24" DIAMETER (PART
NUMBER 66001105) FOR WATER HEATERS HAVING
A DIAMETER 22" OR LESS AND AVAILABLE IN 28"
DIAMETER
(PART HUMBER
66001012)
FOR WATER
HEATERS HAVING A DIAMETER 26.25" OR LESS
Tools
You may or may not need all of these tools, depending on your
type of installation. These tools can be purchased at your local
Maytag store.
• Pipe Wrenches (2) 14"
• Screwdriver
• 6 Foot Tape of Folding Rule
• Garden Hose
• Drill
• Pipe dope or Teflon Tape
6 FOOT TAPE
GARDEN HOSE
SLOT-HEAD SCREW DRIVER
PIPE
WRENCH
PHILLIPS SCREWDRIVER
Cri
PIPE DOPE
(SQUEEZE TUBE)
ROLL OF TEFLON TAPE
(Use only on water connec
tions)
DRILL
ADDITIONAL TOOLS NEEDED
WHEN SWEAT SOLDERING
• Tubing Cutters or Hacksaw
• Propane Torch
• Soft Solder
• Solder Flux
• Emery Cloth
• Wire Brushes
HACKSAW
3/4" WIRE BRUSH
1/2" WIRE BRUSH
ROLL OF LEAD FREE
SOFT SOLDER
ROLL OF EMERY
CLOTH
PROPANE TORCH
SOLDER FLUX TUBING CUTTER