Removing bobbin case and bobbin, Inserting bobbin into bobbin case – SINGER W1760 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
REMOVING BOBBIN CASE AND BOBBIN
1, Raise needle to its highest
position
and
open
the
shuttle race cover.
Hinged latch
i
;
2.
Open hinged latch of
bobbin case and pull bob^
bin case out of macliine.
3. Release the latch and bob
bin will fail out easily.
INSERTING BOBBIN INTO BOBBIN CASE
1. Pull off 5cm of thread
from bobbin and insert it
into bobbin case as shown.
2. Guide the end of thread
into slot.
Advertising