Maytag MD9706 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Note: The dial can be turned in either direction to select a cycle. Once started, the dial

will not advance at a specific rate during the IntelliDry cycles. At first the dial rnay not

advance at all. Toward the end of the cycle (when the load begins to dry) the dial will
advance at a more regular rate and much more quickly. This is normal operation.

IntelliDry

REGULAR automatically senses the moisture in the load and

shuts off when the selected dryness level is reached. This cycle is
designed for loads such as towels, underwear, t-shirts, jeans, etc. Set the
control to the desired dryness level (more dry - less dry). The triangle

symbol. A, between more dry and less dry is the initial preferred setting

for the majority of loads.

’¡Dry

;

a r e

/

s s

Care

O

InteifiDry

TIME DRY/AIR FLUFF may be

selected for any load if the

,

IntelliDry

sensor system is not

desired. Set the control to the
desired number of minutes.

DAMP DRY

is designed to “par­

tially” dry items. It provides

approximately

20

minutes

of

heated tumbling and 5 minutes of
cool

down

tumbling

without

heat.

WRINKLE RELEASE

will release wrinkles from

items that are clean and dry but slightly wrinkled,

such as from a crowded closet, packed suitcase or
from sitting in the dryer too long after the end of the
cycle. It provides 10 minutes of heated tumbling and
5 minutes of cool down tumbling without heat.

Advertising
This manual is related to the following products: