Instructions for ordering, Machine no. 117-3 – SINGER 117-4 User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

INSTRUCTIONS FOR ORDERING

In ordering from this list, use ONLY the part NUMBER

in the FIRST column.

The number stamiied on a Sewing Machine part is in every

case the luiinher of the single part only.

Every cond)ination of parts sent out as such has its specific

number, which, although not stamped on the parts, must be
used when ordering the combination.

Each number always indicates the SAME PART in whatever

list it appears, or for whatever machine.

The letters after some of the numbers indicate the style of

finish oidy, as follows:

A—Hardened, Polished, Nickel Plated and Buffed

B—Polished, Nickel Plated and Buffed

C—Hardened Oidy

D—Polished Only

E—Soft, Not Polished
F—Hardened and Polished

11—Blued

J—Nickel Plated Only

K—Hardened and Nickel Plated

L—Brass Plated

M—Oxidized

N—.lapanued, Dull
P—Japanned, Bright

R—Merlized
T—Copper Plated

T. A.—Hardened, Polished, Copper and Nickel Plated

and Buffed.

T. B.—Copper and Nickel Plated and Polished.

T. J.—Coj)per and Nickel Plated Only.

T. K.—Hardened, Copper and Nickel Plated.

T. M.—Copper Plated and Oxidized.

T. L.— Coi>per and Brass Plated.

U—Zinc Plated
V—Silver Plated

W—Polished and Nickel Plated

Z—Chromium Plated

Z. B.—Polished, Nickel Plated, Buffed and Chromium Plated

Z. J.—Nickel and Chromium Plated.

These letters MUST BE USED

when

they appear in the list;

and AFTER the number as in the list.

In this series:

1 to 1500 and 50001 to 51500 are Screw Numbere.

1501 to 1800 and 51501 to 61800 are Nut Numbers.
1801 to 20t)0 and 51801 to 52000 are Roller Numbers.

2001 to 50000 and 52001 and upward are numbers of

Machine Parts.

The figures in the second column refer only to the plates,

illustrating the parts, and are NOT TO BE USED in ordering.

Parts marked with an asterisk (*) are furnished only when

repairs are made at factory.

LIST OF PARTS COMPLETE

FOR

KlbLl

MACHINE No. 117-3

FOR STITCHING STRAW HATS WITH A CONCEALED STITCH.

ONE NEEDLE. ONE HOOK EYE NEEDLE. POSITIVE SET

FOR REGULATION OF LENGTH OF STITCH. LENGTH OF

STITCH A TO As INCH. THE MACHINE IS FITTED WITH
A THREAD NIPPER RELEASER AND LOOP SPREADER:
ALSO A HINGED COVER TO THROW BACK, FOR THE
CONVENIENCE OF REACHING THE LOWER PARTS OF THE
MACHINE.

SUPERSEDES 117-2 MACHINE

N O . I ' U . ' i T E

*01765 ------- -

64751 8475

21<Jn 8494

64766 8475

33Un 8495

50003 8484

N A M E

Arm, upper and lower (solid) with 64772,

two each 50012c, 64773 and four 50128

e

Arm End Cover (back)...................................

Screw.....................

“ (front).....................................

Screw.....................

“ Oil Tube with 52045.................................

Advertising
This manual is related to the following products: